Epson WorkForce Pro WP-4595 DNF - Creating Header Information

J
For WP-4540/WP-4545:
Press
to add the speed dial entry to the group dial.
Note for WP-4540/WP-4545:
Press
again to cancel adding the speed dial entry that you selected.
For WP-4521/WP-4525/WP-4530/WP-4531/WP-4535/WP-4590/WP-4595:
Press r to add the speed dial entry to the group dial.
Note for WP-4521/WP-4525/WP-4530/WP-4531/WP-4535/WP-4590/WP-4595:
Press l to cancel adding the speed dial entry that you selected.
K
Repeat steps 9 and 10 to add other speed dial entries to the group dial list. You can register up to 30 speed dial
entries in a group dial.
L
Press OK to finish creating a group dial list.
Creating header information
You can create a fax header by adding information such as your phone number or name.
Follow the instructions below to create a fax header. Use the l, r, u, or d buttons to change the LCD screen view to
find the menu, setting item, or option you want to enter.
Note:
Make sure you have set the time correctly.
& “Setting/Changing Time and Region” on page 143
A
Enter F Setup mode.
B
Select Fax Settings.
C
Select Communication.
D
Select Header.
E
Select Fax Header.
F
Enter the header information. You can enter up to 40 characters.
Note for WP-4521/WP-4525/WP-4530/WP-4531/WP-4535/WP-4590/WP-4595:
For details on using the virtual keyboard, refer to the section below.
& “Using the LCD screen” on page 21
WP-4511/4515/4521/4525/4530/4531/4535/4540/4545/4590/4595 User’s Guide
Faxing
104