EasyManuals Logo

Epson WorkForce WF-2840 Series User Manual

Epson WorkForce WF-2840 Series
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Related Information
& “Printing a Network Status Sheet” on page 40
E-12
Solutions:
Check the following.
Other devices on the network are turned on.
e network addresses (IP address, subnet mask, and default gateway) are correct if you are entering them
manually.
e network addresses for other devices (subnet mask and default gateway) are the same.
e IP address does not conict with other devices.
If still does not connect your printer and network devices aer conrming the above, try the following.
Turn o the wireless router. Wait for about 10 seconds, and then turn it on.
Make network settings again using the installer. You can run it from the following website.
http://epson.sn > Setup
You can register several passwords on a wireless router that uses WEP security type. If several passwords are
registered, check if the
rst
registered password is set on the printer.
Related Information
& “Printing a Network Status Sheet” on page 40
& Connecting to a Computer” on page 21
E-13
Solutions:
Check the following.
Network devices such as a wireless router, hub, and router are turned on.
e TCP/IP Setup for network devices has not been set up manually. (If the printer’s TCP/IP Setup is set
automatically while the TCP/IP Setup for other network devices is performed manually, the printer’s network
may dier from the network for other devices.)
If it still does not work aer checking the above, try the following.
Turn o the wireless router. Wait for about 10 seconds, and then turn it on.
Make network settings on the computer that is on the same network as the printer using the installer. You can
run it from the following website.
http://epson.sn > Setup
You can register several passwords on a wireless router that uses the WEP security type. If several passwords are
registered, check if the
rst
registered password is set on the printer.
Network Settings
>
Checking the Network Connection Status
>
Printing a Network Connection Report
39

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WorkForce WF-2840 Series and is the answer not in the manual?

Epson WorkForce WF-2840 Series Specifications

General IconGeneral
Print TechnologyInkjet
Max Print Resolution5760 x 1440 dpi
ConnectivityUSB, Wi-Fi, Wi-Fi Direct
Automatic Document FeederYes
Input Tray Capacity100 sheets
FunctionsPrint, Copy, Scan, Fax
Scan Resolution1200 x 2400 dpi
Paper Capacity100 sheets
Mobile PrintingApple AirPrint
Scanner TypeFlatbed
Fax Speed33.6 Kbps
Paper SizesA4, A5, A6, Letter, Legal
Ink Cartridges4 individual cartridges (Black, Cyan, Magenta, Yellow)
Print Speed (Black)10 ppm
Print Speed (Color)5 ppm

Related product manuals