ero electronic DPS - 2-Wire Transmitter Without Power Supply; 2-Wire Transmitter with Power Supply; 4-Wire Transmitter with Power Supply

16
Fig 2.6 mA INPUT WIRING
NOTE: Don’t run input wires together with power cables.
If shielded cable is used, the shield should be grounded at one point only (see fig. 2.6).
3 4
16 17
OUT POWER
_
++
_
34
16 17
+
_
_
+
4 3
4-wire transmitter with power supply2-wire transmitter with power supply2-wire transmitter without power supply