A Product Description and Installation Process 8
A1 Product Description 8
A2 Recommended Install Process 8
A3 Product Dimensions 9
B Creating the Cavity 10
B1 Cavity Shape 10
B2 Floor Clearances 11
B3 Corner Installations 12
B4 Hearth 12
B5 Cavity Base 12
B6 Wall Linings 12
B7 Television & Mantel Clearances 13
B8 Fascia Dimensions 14
C Installing the Flue 16
C1 Flue Configuration (If less than 4m flue length is required) 16
C2 Flue Configuration (If more than 4m flue length is required) 18
C3 Masonry Vertical Power Flue Kit (up to 6m) 19
C4 Masonry Vertical Power Flue Extension Kit (6 to 12m) 20
C5 Installing the Horizontal Power Flue 21
C6 Installing the Universal Vertical Power Flue (Internal Install) 24
C7 Installing the External Vertical Power Flue (UVP) 26
C8 Installing in Accordance with Relevant Codes 27
C9 Running the Flue 28
C10 Insulation Specification and Installation 29
C11 Running the Power Flue Electrical Cable 29
C12 Setting up the Flue Spigot Plate 30
D Installing the Electricity and Gas to the Appliance 31
D1 Power Supply 31
D2 Removing the Glass 31
D3 Removing the Burners 32
D4 Gas Pipe Sizing 33
D5 Gas Pipe Position 33
E Installing The Appliance 34
E1 Installation 34
E2 Connecting the Flue 34
E3 Removing the Burner Tray 35
E4 Connecting the Power Flue Cable 36
E5 Fixing the Appliance to the Base 36
E6 Network Cable 37
E7 Connecting the Gas Pipe to the Regulator 37
To Next Page
Loading...
