IP Server 900 Programming Manual Function 3: Station programming
F.38
Programming
1. Perform flexible numbering assignments
Here, you’ll be using Function 341 to reassign the numbers in each system.
1. Use IP Server 900 ESI Web System Programmer to connect to the first system in the Esi-Link
network.
2. Select F341, Flexible Number Assignment. Exchange all extension numbers that are to be
assigned to the remote locations with unassigned numbers.
Here’s how:
Range reassignments
a. In the New Type field, select Unassigned.
b. In the Old Type field, select Extension, Department, or a mailbox type.
c. Check the Range checkbox.
d. Select the range of old numbers and an equal quantity of new unassigned numbers, and
click Exchange to confirm.
Individual number assignments
a. In the New Type field, select Unassigned.
b. In the Old Type field, select Extension, Department, or a mailbox type.
c. Select the old number and the new number to be assigned, and click Exchange to confirm.
d. Continue steps b through d until the number reassignments are completed.
3. Use IP Server 900 Web ESI System Programmer to connect to the next system and repeat
step 2.
(Continued)
To Next Page
Loading...
