ESI 900 - Page 111

IP Server 900 Programming Manual Function 3: Station programming
F.44
Feature key chart
Note: These codes are not applicable to SIP phones.
Code
1
Feature key ESI desktop phones
ESI Cordless Handsets
(II or “I”)
#560 Manual day/night mode key Yes Yes
#561 Service observing key Yes Yes
#5DDD ACD agent log on/off key Yes Yes
#562 ACD agent wrap key Yes Yes
#563DDD ACD Administrator key Yes Yes
#564 Headset key Yes No
#565 Call forward key Yes Yes
#565XXX Forward to a destination Yes Yes
#567 Call forward/no-answer key Yes No
#568 Message monitor key Yes Yes
#569 Background announce key Yes Yes
#571 Personal Greeting 1 Yes Yes
#572 Personal Greeting 2 Yes Yes
#573 Personal Greeting 3 Yes Yes
#574 Caller ID key Yes No
#575 and #576 Virtual answer keys Yes No
#577 QuickPage Yes Yes
#578 Mute/DND No (DND only)
#580 Override ring key Yes Yes
#581 Door control Yes Yes
#582 Record No Yes
#583 Quick Switch Yes No
#584 Account codes Yes Yes
#585 LCL (local analog CO line) key No Yes
2
#586 Video Adaptor Yes No
#587 Loop key Yes Yes
599 Overhead page Yes Yes
• Virtual Mailbox Key — If the entered digits are an extension number for a guest, department mailbox,
cascade mailbox, etc., the key will provide for direct transfer to that mailbox, as described above.
However if you program VOICE MAIL and an extension or mailbox number, it will become a Virtual
Mailbox Key, which will indicate message status for the mailbox (the LED will blink red if new messages
exist) and provide direct pick-up of the messages.
To create a Virtual Mailbox Key of a user extension’s mailbox, press VOICE MAIL  and then enter
the applicable extension or mailbox number.
• Private line key — If a private line has been established in CO line programming (see “Private line,”
page E.6), that CO line key must appear on that station’s phone to allow outbound access to the line.
1
DDD = ACD department number. XXX = Forwarded-to extension.
2
Only on Remote IP Cordless Handset.