ESI 900 - Page 113

IP Server 900 Programming Manual Function 3: Station programming
F.46
3. Use the scroll keys to select the day of the week to program for the selected access schedule.
Press # to confirm.
ACC SCHED1
DAY: MONDAY >
If you haven’t yet assigned an allow time (see next step) for this schedule, the display will show
something like:
ACC SCHED1 MON
NO ALLOW TIME
4. Enter the allow time — the time when an electronic key user can begin controlling door locks —
in 12-hour format. (To delete an entry, press HOLD.)
Press # to confirm when done.
ACC SCHED1 MON
ALLOW: 900
5. Select AM or PM by pressing a scroll key. Press # to confirm.
ACC SCHED1 MON
ALLOW: 900 AM
If you haven’t yet assigned a deny time (next step) for this schedule, the display will show something like:
ACC SCHED1 MON
NO DENY TIME
6. Now, enter the deny time — the time when an electronic key user begins to be denied door lock
control — in 12-hour format. (To delete an entry, press HOLD.)
Press # to confirm when done.
ACC SCHED1 MON
DENY: 700 >
7. Select AM or PM by pressing a scroll key. Press # to confirm.
ACC SCHED1 MON
DENY: 700 PM
8. Press # again to exit the function, or select another day of the week by using the scroll keys and then
go back to step 4.