IP Server 900 Programming Manual Function 3: Station programming
F.55
5. Edit the associated ESI Presence Management RFID Reader (one RFID Reader is allowed
per Adapter).
EPM EXT:
6. Edit the associated extensions and departments.
AUTH VIEWER EXT:
7. Edit the password.
PASSWORD:
Important: In order that the password change will take effect, you must update the password in the
Video Adapter’s local Web page (see the earlier explanation of this programming process,
beginning on page F.50).
Those individuals with the IP Server 900’s Administrator password can only:
• Edit the Adapter name.
• Edit the associated extensions and departments.
Deleting a Video Adapter
To delete an ESI Video Adapter ID number (which will stop communication from the Video Adapter to
ESI Video Viewer):
1. Access system function 376.
2. Enter the adapter ID and number.
3. Press HOLD.
This deletes the Video Adapter and takes you back to the start of Video Adapter programming.
(There is no prompt that plays to confirm the deletion.)
To Next Page
Loading...
