ESI 900 - Function 7122: PRI status report

IP Server 900 Programming Manual Function 7: Reports
J.3
Function 7122: PRI status report
Provides current status of each B-channel and D-channel of all the PRI spans in the system.
To print this report, press 1 and press # to confirm.
PRI STATUS
PRESS 1
Here’s an example of output from the Function 7122 PRI status report:
=== PRI channel status === 10/25/2011 8:24 AM
Card slot: 7
Ch:1 St:IDLE Status:0 Usable: Yes
Ch:2 St:IDLE Status:0 Usable: Yes
Ch:3 St:IDLE Status:0 Usable: Yes
Ch:4 St:IDLE Status:0 Usable: Yes
Ch:5 St:IDLE Status:0 Usable: Yes
Ch:6 St:IDLE Status:0 Usable: Yes
Ch:7 St:IDLE Status:0 Usable: Yes
Ch:8 St:IDLE Status:0 Usable: Yes
Ch:9 St:IDLE Status:0 Usable: Yes
Ch:10 St:IDLE Status:0 Usable: Yes
Ch:11 St:IDLE Status:0 Usable: Yes
Ch:12 St:IDLE Status:0 Usable: Yes
Ch:13 St:IDLE Status:0 Usable: Yes
Ch:14 St:IDLE Status:0 Usable: Yes
Ch:15 St:IDLE Status:0 Usable: Yes
Ch:16 St:IDLE Status:0 Usable: Yes
Ch:17 St:IDLE Status:0 Usable: Yes
Ch:18 St:IDLE Status:0 Usable: Yes
Ch:19 St:IDLE Status:0 Usable: Yes
Ch:20 St:IDLE Status:0 Usable: Yes
Ch:21 St:IDLE Status:0 Usable: Yes
Ch:22 St:IDLE Status:0 Usable: Yes
Ch:23 St:CONNECT Status:0 Usable: Yes
D Ch: Link Established