IP Server 900 Programming Manual Function 8: IP programming
L.16
Function 873: SIP trunk allocation
1. Enter the total number of SIP trunks you wish to allocate.
TYPE:SIP TRUNKS
8
2. Press # to confirm.
Important: The sum of all four available IP resource types cannot exceed 127 for the IP/ASC Carrier Card. Also, as
this number is increased, the system will automatically create the trunks, which will appear in Function 2141
(page E.16) to be programmed.
Function 874: Esi-Link trunk allocation
1. Enter the total number of Esi-Link trunks you wish to allocate.
TYPE:ESI-LINK
8
2. Press # to confirm.
Important: System programming reports and port reports may not reflect the revised Esi-Link trunk allocation until a
system power-cycle has been performed.
The sum of all four available IP resource types cannot exceed 127 for the IP/ASC Carrier Card.
To Next Page
Loading...
