IP Server 900 Programming Manual Function 2: CO line programming
E.20
9. Enter the URI of the ITSP, and press # to confirm.
Range: Up to 64 characters. Default: [Blank].
ITSP URI
Note: When using FD trunk type, the Installer must select and enter only one of the three
available URIs provided by the carrier.
10. Use the scroll keys to select a codec, and press # to confirm.
Choices: G.711 (PCMU), G.729.a. Default: G.711 (PMCU).
SIP CHAN CODEC
G.711 (PCMU)
Important: G.711 consumes approximately 106 Kbps of bandwidth per simultaneous call, while
G.729a consumes approximately 43 Kbps of bandwidth per simultaneous call.
G.711 offers superior call quality as compared to G.729a, but only if there is enough
bandwidth to support all simultaneous calls.
11. Either press 1 to save your changes to the IP/ASC Carrier Card or press 2 to exit without
restarting the IP/ASC Carrier Card.
RESTART SIP ITSP
1 = YES 2 = NO
Note: Changes made to IP/ASC Carrier Card programming require that the IP/ASC Carrier
Card be restarted in order for the changes to be uploaded to the IP/ASC Carrier Card.
Press 1 to restart the SIP ITSP now or press 2 to exit and return to the main menu.
Warning: Restarting the SIP ITSP will cause any calls in progress to be disconnected.
To Next Page
Loading...
