ESI 900 - Page 53

IP Server 900 Programming Manual Function 2: CO line programming
E.23
Subsequent steps for “nTelos-BD”, “Cbeyond-BD”, “Comporium-BD”, “Genband-GD”,
or “Cox Cable-BD” . . .
If you selected nTelos-BD in step 2 (see “Common steps 1–2: Selecting SIP provider and ITSP,” page
E.18), the subsequent steps are as follows:
3. Use the scroll keys to select which IP/ASC Carrier Card will be associated with the selected
ITSP, and press # to confirm.
Choice: IP/ASC Carrier Card 1.
ITSP ASSOC
PC 1 SIP XX-XX >
4. Enter the primary billing number assigned by the ITSP, and press # to confirm.
If you need detailed information about entering characters, press HELP.
Range: Up to 10 characters. Default: [Blank].
PRIMARY NUMBER
5. Enter the optional account name assigned by the ITSP, and press # to confirm.
If you need detailed information about entering characters, press HELP.
Range: Up to 32 characters. Default: [Blank].
ACCOUNT NAME
6. Enter the account password assigned by the ITSP, and press # to confirm.
If you need detailed information about entering characters, press HELP.
Range: Up to 32 characters. Default: [Blank].
ACCOUNT PASSWORD
7. Enter the port number that will be used for inbound SIP traffic to the IP/ASC Carrier Card, and
press # to confirm.
Range: 00000–65535. Default: 5060.
LOCAL SIP PORT
5060
8. Enter the number of seconds to use as the initial offer to the ITSP during negotiation of the
SIP re-registration interval.
Range: 5–3600. Default: 1800.
REGISTRATION
EXPIRES: 1800
9. Enter the URI of the ITSP, and press # to confirm.
Range: Up to 64 characters. Default: [Blank].
ITSP URI
(Continued)