ESI 900 - Function 224: DID and DNIS translation table

IP Server 900 Programming Manual Function 2: CO line programming
E.29
Programming Function 223 ARS
1. Enable/disable ARS (default is DISABLED).
2. Select the ARS table to program (3–10).
3. Use the scroll key to select the line group.
4. Enter Other Common Carrier numbers.
5. Enter up to 100 numbers for the table, separating each number by #.
Example: For “1-976,” enter 1 9 7 6 #.
Note: Press MUTE/DND to insert a “wild card” digit. The Hold key will delete an entry.
Warning: Do not include the system’s line access codes (9, 8, or 71–76) in this table.
The system will apply the numbers you enter to their most significant digit.
Examples: Entering 1 5 0 5 into the table tells the system to place all “1+” calls to area code 505 to the line
group and Other Common Carrier listed.
Entering 1 5 0 5 5 5 5 8 7 8 7 into the table tells the system to place “1+” calls specifically to (505)
555-8787 to the line group and Other Common Carrier listed while other “1+505” calls will follow
regular LD routing to line group 8.
After the last number, enter # # to end the list. Enter another list or press # to exit.
Note: Toll restriction, as set in Functions 222 and 321, will be applied to calls before released.
Function 224: DID and DNIS translation table
A translation table is programmed to translate DID or DNIS routing numbers to the corresponding ID branch
(ID), mailbox (MB) extension (EXT), department, or fax server with both day and night destinations. An IP
Server 900 supports up to 10-digit DID and DNIS/ANI. Each model has a maximum number of entries that
can be programmed into the table (multiple numbers programmed to the same destinations); see “Translation
tables” in “System capacities” (page B.1). An entry for exceptions – DID numbers that have been received but
that have not been programmed – is provided and can be programmed for an ID branch (ID), mailbox (MB),
extension or department (X), or fax server (ESI FAX).
Default: First extension in the system.
DID/DNIS NUMBER
#: >
DID/DNIS NUMBER
EXCEPTION: >
(Continued)