Espressif ESP32-S2 User Manual

Chapter 2. API Reference
Range:
• from 3 to 20
Default value:
• 3
CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS
Max number of entries in IPv6 neighbor cache
Found in: Component config > LWIP
Config max number of entries in IPv6 neighbor cache
Range:
• from 3 to 10
Default value:
• 5
CONFIG_LWIP_PPP_NOTIFY_PHASE_SUPPORT
Enable Notify Phase Callback
Found in: Component config > LWIP
Enable to set a callback which is called on change of the internal PPP state machine.
Default value:
• No (disabled) if CONFIG_LWIP_PPP_SUPPORT
CONFIG_LWIP_PPP_PAP_SUPPORT
Enable PAP support
Found in: Component config > LWIP
Enable Password Authentication Protocol (PAP) support
Default value:
• No (disabled) if CONFIG_LWIP_PPP_SUPPORT
CONFIG_LWIP_PPP_CHAP_SUPPORT
Enable CHAP support
Found in: Component config > LWIP
Enable Challenge Handshake Authentication Protocol (CHAP) support
Default value:
• No (disabled) if CONFIG_LWIP_PPP_SUPPORT
CONFIG_LWIP_PPP_MSCHAP_SUPPORT
Enable MSCHAP support
Found in: Component config > LWIP
Enable Microsoft version of the Challenge-Handshake Authentication Protocol (MSCHAP) support
Default value:
• No (disabled) if CONFIG_LWIP_PPP_SUPPORT
Espressif Systems 1176
Submit Document Feedback
Release v4.4

Espressif ESP32-S2 Specifications

General

Brand	Espressif
Model	ESP32-S2
Category	Single board computers
Language	English