Espressif ESP32-S2 User Manual

Chapter 2. API Reference
• ESP_ERR_MESH_ARGUMENT
Parameters
• [out] id: pointer to mesh network ID
esp_err_t esp_mesh_set_type(mesh_type_t type)
Designate device type over the mesh network.
• MESH_IDLE: designates a device as a self-organized node for a mesh network
• MESH_ROOT: designates the root node for a mesh network
• MESH_LEAF: designates a device as a standalone Wi-Fi station that connects to a parent
• MESH_STA: designates a device as a standalone Wi-Fi station that connects to a router
Return
• ESP_OK
• ESP_ERR_MESH_NOT_ALLOWED
Parameters
• [in] type: device type
mesh_type_t esp_mesh_get_type(void)
Get device type over mesh network.
Attention This API shall be called after having received the event
MESH_EVENT_PARENT_CONNECTED.
Return mesh type
esp_err_t esp_mesh_set_max_layer(int max_layer)
Set network max layer value.
• for tree topology, the max is 25.
• for chain topology, the max is 1000.
• Network max layer limits the max hop count.
Attention This API shall be called before mesh is started.
Return
• ESP_OK
• ESP_ERR_MESH_ARGUMENT
• ESP_ERR_MESH_NOT_ALLOWED
Parameters
• [in] max_layer: max layer value
int esp_mesh_get_max_layer(void)
Get max layer value.
Return max layer value
esp_err_t esp_mesh_set_ap_password(const uint8_t *pwd, int len)
Set mesh softAP password.
Attention This API shall be called before mesh is started.
Return
• ESP_OK
• ESP_ERR_MESH_ARGUMENT
• ESP_ERR_MESH_NOT_ALLOWED
Parameters
• [in] pwd: pointer to the password
• [in] len: password length
esp_err_t esp_mesh_set_ap_authmode(wifi_auth_mode_t authmode)
Set mesh softAP authentication mode.
Attention This API shall be called before mesh is started.
Return
• ESP_OK
• ESP_ERR_MESH_ARGUMENT
• ESP_ERR_MESH_NOT_ALLOWED
Espressif Systems 145
Submit Document Feedback
Release v4.4

Espressif ESP32-S2 Specifications

General

Brand	Espressif
Model	ESP32-S2
Category	Single board computers
Language	English