Chapter 1. Get Started
Software Setup Please proceed to Get Started, where Section Installation Step by Step will quickly help you set up
the development environment.
The programming guide and application examples for your ESP32-S2-Kaluga-1 kit can be found in esp-dev-kits
repository on GitHub.
Contents and Packaging
Retail orders If you order one or several samples of the kit, each ESP32-S2-Kaluga-1 development kit comes in
an individual package containing:
• Main Board
– ESP32-S2-Kaluga-1
• Extension Boards:
– ESP-LyraT-8311A
– ESP-LyraP-CAM
– ESP-LyraP-TouchA
– ESP-LyraP-LCD32
• Connectors
– 20-pin FPC cable (to connect ESP32-S2-Kaluga-1 to ESP-LyraP-TouchA)
• Fasteners
– Mounting bolts (x8)
– Screws (x4)
– Nuts (x4)
For retail orders, please go to https://www.espressif.com/en/company/contact/buy-a-sample.
Wholesale Orders If you order in bulk, the boards come in large cardboard boxes.
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
Hardware Reference
Block Diagram A block diagram below shows the components of the ESP32-S2-Kaluga-1 and their interconnec-
tions.
Power Supply Options There are four ways to provide power to the board:
• Micro USB port, default power supply
• External battery via the 2-pin battery connector
• 5V and GND header pins
• 3V3 and GND header pins
Compatibility of Extension Boards If you want to use more than one extension board at the same time, please
check the table given below.
Espressif Systems 32
Submit Document Feedback
Release v4.4
To Next Page
Loading...
Need help?
General