Espressif ESP32-S2 - Page 968

Chapter 2. API Reference
(continued from previous page)
//Actually send to the ring buffer for consumer to use
res = xRingbufferSendComplete(buf_handle, &item);
if (res != pdTRUE) {
printf("Failed to send item\n");
}
The following example demonstrates retrieving and returning an item from a No-Split ring buffer using xRing-
bufferReceive() and vRingbufferReturnItem()
...
//Receive an item from no-split ring buffer
size_t item_size;
char *item = (char *)xRingbufferReceive(buf_handle, &item_size, pdMS_TO_
,→TICKS(1000));
//Check received item
if (item != NULL) {
//Print item
for (int i = 0; i < item_size; i++) {
printf("%c", item[i]);
}
printf("\n");
//Return Item
vRingbufferReturnItem(buf_handle, (void *)item);
} else {
//Failed to receive item
printf("Failed to receive item\n");
}
The following example demonstrates retrieving and returning an item from an Allow-Split ring buffer using xRing-
bufferReceiveSplit() and vRingbufferReturnItem()
...
//Receive an item from allow-split ring buffer
size_t item_size1, item_size2;
char *item1, *item2;
BaseType_t ret = xRingbufferReceiveSplit(buf_handle, (void **)&item1, (void␣
,→**)&item2, &item_size1, &item_size2, pdMS_TO_TICKS(1000));
//Check received item
if (ret == pdTRUE && item1 != NULL) {
for (int i = 0; i < item_size1; i++) {
printf("%c", item1[i]);
}
vRingbufferReturnItem(buf_handle, (void *)item1);
//Check if item was split
if (item2 != NULL) {
for (int i = 0; i < item_size2; i++) {
printf("%c", item2[i]);
}
vRingbufferReturnItem(buf_handle, (void *)item2);
}
printf("\n");
} else {
//Failed to receive item
printf("Failed to receive item\n");
}
The following example demonstrates retrieving and returning an item from a byte buffer using xRingbuffer-
ReceiveUpTo() and vRingbufferReturnItem()
Espressif Systems 957
Submit Document Feedback
Release v4.4