ES415.1 - User’s Guide36
Getting Started ETAS
5.2 Assembly
5.2.1 How to Connect and Attach ES400 Modules
Fig. 5-2 How to Attach ES400 Modules
Integrated Assembly Elements
Every ES400 module has two integrated assembly elements to enable different
assembly possibilities. If several modules are required in one location, they can be
connected quickly, without any additional parts, using the integrated assembly
elements to form a measuring instrument block (cascading). The two integrated
assembly elements also make it possible to screw the modules directly onto other
components (parts of the vehicle body, units).
Fig. 5-3 Accessing the Integrated Assembly Elements
You can access and use the two integrated assembly elements of a module via
the holes indicated (see Fig. 5-3 on page 36) on the right-hand side of the mod-
ule.
Fig. 5-4 Unscrewed Integrated Assembly Elements
Openings for Cable Fasteners
Every module base has two openings each on the right and left-hand side for
attaching the modules to other components using cable fasteners.
fåíÉÖê~íÉÇ
^ëëÉã Ääó =bäÉã Éå íë
léÉåáåÖë=Ñçê
`~ÄäÉ=c~ëíÉåÉêë
To Next Page
Loading...
