ETAS ES415.1 - Software

ES415.1 - User’s Guide76
Technical Data ETAS
7.7.2 Software
To configure the ES415.1 and for control and data acquisition, you need soft-
ware in the following versions:
General
• ES4xx Configuration Tool V1.3.4 and higher from ES4xx_DRV_SW (stand-
alone operation)
• HSP V9.9.3 and higher
Measurement and Calibration (MC)
• INCA V7.0 and higher with INCA Add-On ES4xx V1.3.4 and higher
Rapid Prototyping (RP)
• INTECRIO V4.2 and higher
or
• INTECRIO-RLINK V1.0 and higher
or
• ASCET-RP V6.1.3 and higher
Note
Operating the ES415.1 with older versions of software is not possible.