ES415.1 - User’s Guide 75
ETAS Technical Data
7.5 Declarable Substances
European Union
Some products from ETAS GmbH (e.g. modules, boards, cables) use components
with substances that are subject to declaration in accordance with the REACH
regulation (EU) no.1907/2006.
Detailed information is located in the ETAS download center in the customer
information "REACH Declaration" (www.etas.com/Reach
). This information is
continuously being updated.
7.6 Use of Open Source software
The product uses Open Source Software (OSS). This software is installed in the
product at the time of delivery and does not have to be installed or updated by
the user. Reference shall be made to the use of the software in order to fulfill OSS
licensing terms. Additional information is available in the document "OSS Attri-
butions List" at the ETAS website www.etas.com.
7.7 System Requirements
This section tells you what hardware and software is needed to operate your
ES415.1 module.
7.7.1 Hardware
Power supply
Operation of the modules requires a power supply voltage of 5 V to 50 V/ 6 V to
50 V DC.
PC with one Ethernet interface
A PC with one open Ethernet interface (100 Mbit/s, full duplex) with RJ-45 con-
nection is required.
Requirement to ensure successful initialization of the module
To deactivate the power saving mode:
Choose in System Control Center / Device Manager / Network Adapter the used
network adapter by double-click. Deactivate the "Allow the computer to turn off
this device to save power" option in the "Power Management" register. Confirm
your configuration.
The manufacturers of network adapter have different names for this function.
Example:
• “Link down Power saving”
• "Allow the computer to turn off this device to save power".
It is imperative you disable the function which automatically switches to power-
saving mode on your PC network adapter when there is no data traffic on the
Ethernet interface!
To Next Page
Loading...
