ES415.1 - User’s Guide 97
ETAS
8.3.3 CBAV413.1 Cable
Fig. 8-20 CBAV413.1 Cable
The CBAV413.1 cable consists of four identical cable sections with LEMO plugs,
marked n=1 to n=4. Each cable section [n] is assigned to an ES4xx measurement
channel [n] and wired according to the same scheme.
Fig. 8-21 Connection „Sensor“ (one Cable Section)
The assignment of the connections of the LEMO connector of a cable strand to
the signals of a measurement channel [n] is represented in the table.
Notes about the Application
If you replaced IPETRONIK M-SENS modules with ES4xx modules in your measur-
ing setup, the use of these adapter cables enables you to continue using the
existing cabling of your measuring setup.
Temperature rated for: -40 °C bis +125 °C
Pin Signal Meaning
1 CH[n] In+ Measurement channel [n], input (+)
2 CH[n] In- Measurement channel [n], input (-)
4 CH[n] S+ Measurement channel [n], sensor supply (+)
5 CH[n] SGND Measurement channel [n], sensor supply
GND *)
*): connected with operating voltage Ground
Product Length Order number
CBAV413.1-0m3 0.3 m F 00K 105 682
To Next Page
Loading...
