ES415.1 - User’s Guide74
Technical Data ETAS
7.2 RoHS conformity
7.2.1 European Union
The EU Directive 2011/65/EU limits the use of certain dangerous materials for
electric and electronic devices (RoHS conformity).
ETAS confirms that the product meets this directive applicable in the European
Union.
7.2.2 China
ETAS confirms that the product meets the "China RoHS" (Management Methods
for Controlling Pollution Caused by Electronic Information Products Regulation)
guidelines applicable to the People's Republic of China with a China RoHS label
attached to the product or its packaging.
7.3 CE marking
With the CE mark attached to the product or its packaging, ETAS confirms that
the product corresponds to the product-specific, applicable European Directives.
The CE Declaration of Conformity for the product is available upon request.
7.4 Product return and recycling
The European Union (EU) has issued the guideline on waste electric and elec-
tronic equipment (Waste Electrical and Electronic Equipment - WEEE) in order to
ensure the institution of systems for collection, handling, and disposal of all elec-
tronic scrap.
This ensures that the devices are recycled in a resource-friendly way that does not
represent any risk to personal health and the environment.
Fig. 7-1 WEEE symbol
The WEEE symbol (see Fig. 7-1 on page 74) on the product or its packaging iden-
tifies that the product may not be disposed of together with the remaining trash.
The user is obligated to separate the waste equipment and to provide it to the
WEEE return system for reuse.
The WEEE Directive applies to all ETAS devices, but not to external cables or bat-
teries.
Additional information about the recycling program of ETAS GmbH is available
from the ETAS sales and service locations (see chapter 10 on page 108).
To Next Page
Loading...
