ES415.1 - User’s Guide 71
ETAS Technical Data
7.1.2 Standards and Norms
The module adheres to the following standards and norms:
The module is designed only for use in industrial environments in accordance
with EN 61000-6-4. When using the module outside of industrial environments
avoid possible radio disturbances by additional shielding measures!
Labeling for WEEE, see chapter 7.4 on page 74
Labeling for CE conformity, see chapter 7.3 on page 74
Labeling for RoHS (China), see chapter 7.2.2 on page 74
Standard Test
EN 61326 Electrical equipment for measurement,
control and laboratory use - EMC
requirements
EN 61000-6-2 Immunity (industrial environments)
1)
EN 61000-6-4 Emission standard (industrial environ-
ments)
1)
: The module must be supplied by a DC power supply or a battery with oper-
ating voltage. Between module and voltage source, cables with a maximum
length of 30 m are allowed.
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to
take adequate measures.
Norm Test
DIN EN 60068-2-1 Premature fatigue cold test
DIN EN 60068-2-2 Premature fatigue heat test
DIN EN 60068-2-13 Negative pressure
DIN EN 60068-2-14 Na Temperature shock
Symbol Description
To Next Page
Loading...
