5.10.2 Daylight Saving
Figure 5-31 System Menu – Daylight Saving
Daylight Saving: Check the box to enable daylight saving time.
Start Date: Set the start date of daylight saving time.
Start Time (hh:mm): Set the time when daylight saving time begins.
Set To (hh:mm): This is what the time will change to when daylight saving begins. For most regions, this
will be one hour ahead of the “Start Time”.
End Date: Set the end date of daylight saving time.
End Time (hh:mm): Set the time when daylight saving time ends.
To Next Page
Loading...
