EVOCA Krea Touch - Page 14

4 04-2017 5325 00
EsprEsso aDjustmENts
-Coffee grain size
-Coffee dose
-Water dose
frEsH brEw aDjustmENts
-Pre-ground product dose
-Water dose
-Infusion time
iNstaNt aDjustmENts
-Instant powder doses
-Water dose
tEmpEraturE aDjustmENt
Sets the temperature of heating unit via the
software.
ENablE sigNs
-Water present
-Coffee present
-Brewing unit in position
-Liquid residue container is present
-Liquid residue container is empty
-Heating unit temperature reached
safEty mEasurEs
-Door switch
-The microswitch disables connectivity
when the door is open
-Heating unit safety thermostat has a man-
ual reset
-Air-break float jams
-Anti-flooding solenoid valve
-Full liquid waste container float
-Short circuits control/heating unit probe(s)
cut in
-Main electrical circuit fuse.
couNtDowN protEctioN DEvicE of tHE:
-Brewing unit gearmotor
-Grinder
-Pump
tHErmal protEctioN DEvicE of tHE:
-Brewing unit gearmotor
-Coffee-releasing electromagnets
-Grinders
-Motor-doser
-Motor mixer
-Pump