14 04-2017 5325 00
WASH CYCLES
The appliance has been designed to per-
form wash cycles on the main functional
units.
During the wash cycles, hot water
comes out of the nozzles, which poses
Do not place your hands in the dis-
there is a danger of scalding.
The wash cycles do not replace the
need to disassemble the components
for regular sanitisation .
Before performing the wash cycles,
position a tray underneath the nozzles.
accEssiNg tHE wasH fuNctioNs
To access:
1. Touch
washEs when the door is closed.
2. Tap the icons of the components you
would like to wash on the "wash” screen.
For appliances that do not have a drainage
system for the liquid residue containers, it
is recommended to place a container with a
capacity of at least 3 litres under the noz-
zles.
RINSING THE COMPONENTS
Start the rinse cycle (with hot water only) of
the various components (mixer, unit, etc.).
The rinse cycles do not replace the
need to disassemble the components
for regular sanitisation.
Remove the cups and/or glasses from the
dispensing area.
Do not place your hands under the
a danger of scalding.
For the entire duration of the rinse cycle,
the selections will remain disabled.
BREWING UNIT WASH CYCLE
The brewing unit wash cycle should be car-
ried out each time that the appliance has
frequently, depending on how often the ap-
pliance is used.
When the brewing unit needs to be cleaned
(with detergent), it signals when the time
limits and/or number of selections have
been reached.
dispensed until the brewing unit wash
cycle is performed.
-
ucts.
When using these products, strictly
follow the manufacturer's instructions
on storage, handling, dosing and use;
carefully read the safety instructions.
When using generic products, there is no
guarantee that they are hygienic, will not
alter the taste of the beverages, or will have
no consequences on human health.
Place a container with a capacity of at least
3 litres under the nozzles in order to collect
the wash residues.
To Next Page
Loading...
