04-2017 5325 00 47
EsprEsso tEmpEraturE low
The espresso heating unit temperature is
lower than the minimum temperature that
has been programmed for dispensing.
Wait for the minimum dispensing tempera-
ture that has been set to be reached.
macHiNE DatabasE Not availablE
The machine database that groups to-
gether and manages the machine con-
loaded or created.
space.
The appliance has been taken out of ser-
vice.
statistics
sHow
statistics
Displays the selection statistics (e.g. the
number of dispenses carried out, time and
date of the last dispense, etc.)
rEsEt statistics
Resets the stored statistics of the selec-
tions.
sHow auDit
Displays the total number of dispenses and
the total dispenses since the last statistics
reset, for each selection.
The function allows the audit data that is
NumbEriNg sElEctioNs
Allows the selections to be numbered and
match the selection number-beverage in
the statistics.
Each selection must have a unique num-
ber.
favouritEs
"Favourites" are shortcuts to frequently
used functions.
After having added a function to the “fa-
vourites,” simply view the “favourites” and
tap the function for quick access.
list of favouritEs
Displays all frequently used functions that
have been saved as “favourites”
Tap the selected function to access it.
clEar tHE list of favouritEs
It allows the functions that have been
stored as “favourites” to be removed.
A single function or all functions (delete all)
can be removed.
To remove a single function: tap the button
deleted.
macHiNE iDENtificatioN
Allows you to enter a numerical code and
name to identify the appliance.
The code can be used to identify the appli-
ance when analysing the statistics.
iNstallatioN DatE
Allows the date that the appliance was in-
stalled to be set.
The date is used to manage mainte-
rinse cycle intervals.
tEcHNical support coNtact iNformatioN
Allows the contact information (name and
phone number) of the technical support to
be entered, in the event of faults.
This information will be displayed should a
fault occur.
This information can be displayed for faults
which block the appliance and/or faults
which do not block the appliance.
Use
to edit the contact information.
To Next Page
Loading...
