04-2017 5325 00 57
filliNg aND EmptyiNg tHE HEatiNg uNit
If work is performed on the hydraulic circuit
The heating unit emptying function opens a
solenoid valve to allow air to enter the heat-
ing unit.
filliNg tHE HEatiNg uNit
the appliance is installed.
maintenance work has been performed on
pockets form.
EmptyiNg tHE HEatiNg uNit
The heating unit must be emptied by
technical personnel.
The heating unit water is very hot
and can cause burns.
Before emptying the heating unit,
wait for the water in the heating unit to
cool down.
The appliance has a procedure for "quickly
cooling" the heating unit.
The emptying function opens a solenoid
valve to allow air to enter the heating unit.
macHiNE paramEtEr tEsts
Sets the activation time of the components
during the self-test.
rEstorE factory sEttiNgs
Allows the appliance to be restored to its
factory settings.
All the statistical data, fault lists and set-
tings will be lost. time and date settings
The time and date are used to record
events (for example faults, etc.), manage
programmed washes and produce mainte-
nance warnings.
Set the current date and time.
laNguagE
messages on the user interface and in the
menus can be changed.
Some languages are available for the
“change language” function.
To make other languages available for the
must be moved to “Used languages”.
To delete a language from the “change lan-
“Disabled languages”.
To Next Page
Loading...
