72 04-2017 5325 00
SOFTWARE
If the operating system is installed
-
ware, statistical data and any settings
or customisations that have been made
are deleted.
-
-
The software must be installed and/or up-
dated (when the appliance starts up) using
a USB stick.
There is no guarantee that all USB
compatible.
kEy 1 “systEm kEy” opEratiNg systEm
Proceed as follows:
1. Copy the individual operating system
files into the USB stick's root directory.
2. Turn off the appliance.
3. Insert the USB stick into the usb otg
port of the CPU board.
4. Turn on the appliance.
5. Some messages regarding the update
process are displayed.
The update can take several minutes.
6. Once the update has finished, a mes-
sage will appear prompting for the USB
stick to be removed.
7. After the USB stick has been removed,
the appliance will automatically restart.
8. Install the application software.
kEy 2 “upDatE kEy” applicatioN
Proceed as follows:
1. Copy the individual application files into
the USB stick's root directory.
2. Turn off the appliance.
3. Insert the USB stick into the usb otg
port of the CPU board.
4. Turn on the appliance.
5. Some messages regarding the update
process are displayed.
The update can take several minutes.
6. Once the update has finished, a mes-
sage will appear prompting for the USB
stick to be removed.
7. After the USB stick has been removed,
the appliance will automatically restart.
8. The preliminary settings wizard (appli-
ance model, message language, ma-
chine name, etc.).
When the application software is
-
ages.
To Next Page
Loading...
