58 04-2017 5325 00
usEr profilEs
Some programming functions can be ena-
functions linked to it can be used.
The default passwords are:
-Technician (4444)
-Distributor (3333)
-Loader (2222)
-User (1111)
Advanced programming functions must
only be used by people with specific
This function can be used to change the
access password for each user profile; tap
the keypad icon to change the password.
NEtwork
depending on the network that the appli-
ance will be connected to and the adopted
network protections.
-
nected to.
The device supports the TCP/IP protocol.
The Ethernet and Wi-Fi connections
cannot be enabled at the same time.
EtHErNEt
Allows to appliance's network card to be
Enable the network card in order to connect
the appliance to the LAN network.
all the network parameters that can be
changed are displayed.
The network parameters (such as IP
address, etc.) can be:
- assigned automatically (DHCP)
or
-manually.
-
eters there must be a DHCP server on
The MAC address is a unique address as-
the appliance's network card.
To Next Page
Loading...
