04-2017 5325 00 43
maiNtENaNcE
programmiNg
automatic wasHEs/ riNsEs
The appliance’s automatic wash and/or
rinse cycle programmes can be enabled/
disabled.
Programme the type of wash and/or rinse
to be performed on the day and time that
has been set.
It is possible to add and remove automatic
wash/ rinse cycles.
hot water. Do not place your hands in
of burns.
During the washes/ rinses a message will
appear.
NExt maiNtENaNcE
Allows the number of days and/or number
of dispensed beverages to be set; when
this is reached, the appliance will display a
"perform maintenance” message.
maiNtENaNcE NotificatioN
Reset the counter which manages the
maintenance alerts.
Only reset the counter to zero after
carried out.
wasH mEssagEs
Manages the wash message settings.
Set after how many hours and/or selections
to display the wash messages.
Washes can be made compulsory from this
function.
gENEral sEttiNgs
taNk
The appliance can be supplied by mains
(OFF) or a tank (ON).
ENabliNg tHE DispENsiNg complEtE
warNiNg
Enables/ disables a beep when the appli-
ENabliNg tHE paymENt systEm
Enables/ disables the appliance's payment
system.
Enable the payment system to activate all
its features (price settings, etc.).
powEr supply
Allows the voltage used to power the appli-
ance to be set.
setting this value.
The setting allows all the electrical
components to be correctly managed
and optimises the appliance's operat-
ing cycles.
To Next Page
Loading...
