56 04-2017 5325 00
compoNENt tEst
Allows the appliance’s main components to
be tested.
The components that can be tested are
displayed.
Choose the component to be tested.
brEwiNg uNit
Starts moving the brewing unit.
EsprEsso coNtaiNEr
motor-DosEr
The instant powder motor-doser is activat-
ed for a few seconds.
mixEr
The mixer is activated for a few seconds.
ligHtiNg
The appliance’s lighting is activated for a
few seconds.
solENoiD valvEs
The selected solenoid valve is activated for
a few seconds.
During the test, hot water is dis-
dispensing area.
pumps
The selected pump is activated for a few
seconds.
During the test, hot water is dis-
dispensing area.
sENsor aND iNput DEvicE tEsts
Displays the status screen of the appli-
ance’s control devices (probes, micros-
witches, etc.)
The function is useful for having a general
overview of the machine’s various sensors.
For devices with ON/OFF functions, the
status is shown using colour: green is used
if the appliance is active/ actuated, and red
is used if it is disabled/ not actuated.
For the sensors, the detected value is dis-
played (e.g. temperature).
output DEvicE tEsts
Allows the operation of the appliance's vari-
ous components to be checked.
The components that can be checked are
displayed.
Choose the component to be tested.
For safety reasons the test must be
carried out with the door closed.
toucHscrEEN tEst
Allows the touchscreen function to be
checked.
-
screen.
The test allows any touchscreen areas with
little or no sensitivity to be detected.
To Next Page
Loading...
