48 04-2017 5325 00
ENERGY SAVING MODE
The appliance's energy saving function can
time frames set.
sEttiNgs
Enables / disables power saving features.
The appliance can manage various energy
Some of the parameters in every energy
“soft moDE” profilE
mode after the appliance has a period of
inactivity.
When a selection is requested, the ma-
chine exits the energy saving mode.
It is possible to:
-Set after how many minutes of appliance
inactivity to activate the energy saving
profile.
-Set the maintenance temperature of the
heating unit(s) in the energy saving mode.
-Enable/ disable the appliance’s lighting.
-Select the touchscreen brightness level
from those that have been predefined.
“DEEp moDE” profilE
frames.
During the set time frames, the heating unit
temperature is lowered and the mainte-
nance temperature is set.
It is possible to:
-Set by how many minutes to advance the
heating unit’s heating before the end of the
of the time frame.
E.g. 5 minutes: 5 minutes before the end
of the time frame, the heating unit heat-
ing cycle is activated in order to reach the
operating temperature.
-Set the maintenance temperature of the
heating unit(s) in the energy saving mode.
-Enable/ disable the appliance’s lighting.
-Select the touchscreen brightness level
from those that have been predefined.
To Next Page
Loading...
