04-2017 5325 00 59
wi-fi
Allows the appliance's Wi-Fi connection to
Enable the Wi-Fi connection to connect the
appliance to a Wi-Fi network.
The appliance supports the major Wi-Fi
protection systems (encryption).
The “open” encryption does not guarantee
any kind of protection.
Enable the Wi-Fi connection and the appli-
ance will show the available Wi-Fi networks.
Choose the name of the Wi-Fi network
(SSID) to connect to; if the Wi-Fi network is
hidden, you need to know the name (SSID)
and enter this manually.
The network parameters (such as IP
address, etc.) can be:
- assigned automatically (DHCP)
or
-manually.
-
eters there must be a DHCP server on
The protection parameters and the
be set manually.
The MAC address is a unique address as-
the appliance's network card.
bluEtootH
Bluetooth connection and exchange data at
a short distance (up to 10 metres) between
the appliance and other devices.
To connect to a Bluetooth device you need
to:
-enter the equipment identifier.
-Make the device discoverable when
searching for Bluetooth devices.
In discovery mode a wireless signal is
transmitted that allows the device to be
detected by other devices.
-Enter the authentication code to link the
Bluetooth device.
When a device is discoverable, its pairing
mode is also usually active.
Paired devices are shown.
firEwall
It allows you to increase the appliance’s se-
curity in order to prevent unwanted access
when it is connected to a network.
To Next Page
Loading...
