Description of the unit
Edition 10_2010 - 38891EN-900-AB
17
Table illumination
A LED-ledge gives permanent illumination
of the work table. Optimum illumination of
the sample during cutting with low energy
consuption (approx. 5W)
Large splash
guard
Better cover of the sample especially for
large samples or when working with high
cooling flush. Very good protection against
spraying water by a large plexiglass plate
additionally with flexible plastic foils. Retrofit
at each machine can easilly done by the
operator.
Additional diamond
cutting band for cutting
implants
On cutting implants the cutting band will
wear very quickly. It is recommended to use
separate cutting bands for cutting implants
and for cutting fresh samples.
Whetstone
With some samples the cutting band will
clog very quickly. The cutting band can be
cleaned quickly and conveniently using the
whetstone.
To Next Page
Loading...
