Exakt 312 - Safety Devices

Safety
Edition 10_2010 - 38891EN-900-AB
9
caused by accessories or spare parts that have not been recommended
is excluded.
u Use only accessories and genuine spare parts recommended by
EXAKT.
1.2 Safety devices
The safety devices on the EXAKT 312 comply with the statutory
requirements and are aimed at preventing injury or damage.
Emergency-stop pushbutton
The emergency-stop pushbutton is used to stop the cutting band motor
within approx. 4 seconds in case of danger.
Abb. 1 Emergency-stop pushbutton
In case of danger:
u Press the emergency-stop pushbutton 14.
u Rectify malfunction.
u Pull out the emergency-stop pushbutton 14 to unlock.
u Press the acknowledge button.
The interrupted circuit is closed again. However, the cutting band
does not
re-start automatically.
u To start the cutting band, press the start button.
Nip guard
The nip guards protect against unintentional entanglement in the rotating
pulleys.
Acknowledge button
After any action that interrupts the safety circuit on the EXAKT 312, the
14