Description of the unit
Edition 10_2010 - 38891EN-900-AB
16
4.2 Optional accessories
To make the work easier, the following accessories can be ordered for
the EXAKT 312 (for order numbers see section 13.3 Optional
accessories):
Accessory Description
Rip fence
For straight and parallel cuts on tissue
samples a rip fence can be installed on the
work table.
Line laser
To align the cutting plane on the sample
with the aid of the laser projection of the
saw blade plane.
Cleaning gun
For intermediate cleaning and rinsing of the
work plate after use, we recommend a
cleaning gun. The cleaning gun is
connected to the water supply connection.
When not in use it is placed in a holder on
the base.
Castor set
A castor set eases the transport of the saw
base unit to the installation location. The
castors can be locked once the unit is
setup.
To Next Page
Loading...
