Cleaning
Edition 10_2010 - 38891EN-900-AB
41
8.4 Cleaning agents
Attention – damage!
Damage to the external surfaces due to cleaning agents containing
chlorine and aggressive cleaning agents.
u Do not use disinfectants containing chlorine or aggressive
disinfectants such as acetone or nitro thinner.
u Only use alcohol-based disinfectant.
You can use the disinfectants usually found in laboratories, provided they
are alcohol-based, such as:
• disinfection spray
• instrument disinfectant
8.5 Cleaning and pre-disinfecting
Remove the soiling that has accumulated on all parts of the unit during
use prior to disinfection.
Cleaning the work table and external housing
u Clean the top of the work plate with cellulose wipes.
u Clean all external surfaces.
Pre-disinfecting the external and internal housing
u Pre-disinfect all external surfaces.
u Open top and bottom door.
u Pre-disinfect all internal surfaces.
Pre-disinfecting the work table
Attention – damage!
The cutting band can get damaged.
u Carefully pull work plate out of the work table tray along the cutting
band.
The work table comprises several components which have to be removed
one after the other for cleaning.
To Next Page
Loading...
