Cleaning
Edition 10_2010 - 38891EN-900-AB
40
8.3 Cleaning schedule
Always keep the working area of the EXAKT 312 in a clean condition. The
following table provides an overview of all cleaning tasks required with
recommendations for the cleaning intervals.
Applicable guidelines and hygiene regulations are to be followed as a
matter of priority.
Consumables used during cleaning and contaminated waste water are to
be disposed of in accordance with the applicable hygiene plan of the
laboratory in which the EXAKT 312 is setup.
Part
Cleaning
interval
Components to be cleaned
Work table After each use.
• Work plate
• Work table tray
• Run-off plate
• Cutting band guide, work
table
Cutting band After each use.
• Cutting band
• Cutting band guide,
top/bottom
Pulley top/bottom After each use.
• Pulley
• Guide groove
• Belt, yellow
Housing After each use.
• Housing
• Inside of doors
• Outside of doors
• Splash guards
• Nip guards
• Drain pan
Cutting band guide After each use.
• Cutting band guide with its
individual components
Hoses At your
discretion and
based on level
of soiling.
• Water drain hose
• Water supply hose
• Cooling water hose
To Next Page
Loading...
