Cleaning
Edition 10_2010 - 38891EN-900-AB
46
Disinfecting the internal and external housing
u Disinfect all internal and external surfaces.
u Remove the splash guard and soak in disinfectant solution.
u Then rub the splash guard dry.
8.7 Re-fitting removed components
Re-fit the components in the following order:
• Cutting band guide
• Pulley, top
• Cutting band
• Work plate
• Cutting band guide, work table
• Run-off plate
• Splash guard
For a detailed description, see chapter 5 Installation.
To Next Page
Loading...
