Routine operation
Edition 10_2010 - 38891EN-900-AB
35
7 Routine operation
The following subjects are described in this chapter:
• Preparing routine operation
• Undertaking routine operation
• Ending routine operation
7.1 Preparing routine operation
Warning – risk for the health due to biological contamination!
Contaminated samples and water can cause infections.
u Always wear the stipulated protective clothing and safety glasses for
work with the EXAKT 312.
u Use suitable disinfection methods in accordance with applicable
statutory provisions and guidelines, and the hygiene regulations.
Warning – injuries!
You may suffer injuries while working with the EXAKT 312.
u Do not touch the cutting band in operation.
u Wear safety glasses.
u Wear tight-fitting clothing during all work.
u Protect long hair with headgear.
Abb. 24 Setting the water controls
For an optimum cutting result, the cooling and flushing of the cutting band
is important. The cooling water should run along the cutting band.
To Next Page
Loading...
