Excell PH3 - Page 65

02006100 ZSME300000379
64
EXCELL PRECISION CO., LTD.
Command Format C
Host
Command+ Data
Slave
Command+ Data
Write Weight Comparison Settings Value WSXXXXXX
: group (00 ~ 09) : settings item XXXXXX: Settings value
LO
Write LO settings value
HI
Write HI settings value
OK
Write Target settings value
RG
Write Range settings value
PT
Write Pre-Tare settings value
EX:
WSPTXXXXXX＜CR＞＜LF＞
Write Pre-Tare settings value
ANS:
WSPTXXXXXX＜CR＞＜LF＞
EX:
WS03RG XXXXXX＜CR＞＜LF＞
Write Range settings value
ANS:
WS03RG XXXXXX＜CR＞＜LF＞
The above 3 command formats are all Bi-directional RS-232 commands.
 Error messages on Slave (Scale):
E1: Wrong command
E2: Command format error (Wrong parameters)
E3: Command not recognized