Test Setup - Test Configurator, Timer, and System
116 FTB-700G/800 Series
1588 PTP
Pass/Fail Verdict
Pass/Fail Verdict check box when selected (default) enables the use of the
pass/fail verdict. The global pass/fail verdict is based on the following
criteria: alarms (Link Down, Loss Sync, Loss Announce, Unusable,
and/or QL Mismatch (when QL Mismatch Monitoring is enabled)), or the
test is automatically aborted (service request denied, session canceled, or
no reply).
Restore 1588 PTP Defaults
Reverts the 1588 PTP test application to its default factory settings.
To Next Page
Loading...
