Test Results
358 FTB-700G/800 Series
Link OAM
Link OAM
From the Test menu, tap Results, and the Link OAM tab.
Remote MAC Address
Indicates the remote OAM link partner MAC address.
Remote OAM Information
OAM Version indicates the protocol version supported by the DTE.
Revision indicates the revision of the Information TLV.
Multiplexer Action reports the Multiplexer Action:
Forward indicates that the device is forwarding non-OAMPDUs to the
lower sublayer.
Discard indicates that the device is discarding non-OAMPDUs.
Parser Action reports the Parser Action:
Forward indicates that the device is forwarding non-OAMPDUs to the
higher sublayer.
Loopback indicates that the device is looping back non-OAMPDUs to
the lower sublayer.
Discard indicates that the device is discarding non-OAMPDUs.
OAM Mode reports the OAM mode:
Active indicates that the DTE is configured in Active mode.
Passive indicates that the DTE is configured in Passive mode.
OUI reports the 24-bit IEEE Organizationally Unique Identifier field
identifying the vendor.
Maximum OAMPDU Size reports the maximum OAMPDU size in bytes,
supported by the DTE.
To Next Page
Loading...
