Test Functions
NetBlazer 519
RTD (CPRI Framed L2)
RTD (CPRI Framed L2)
Note: Only available with CPRI Framed L2 in Base Station emulation mode.
Round Trip Delay (RTD) measurements are needed to quantify the time it
takes for a signal to cross the remote radio head and come back.
Note: Be aware that RTD requires error free operation conditions to provide
reliable results. Therefore, RTD results could be affected by error injection
or error introduced by the network.
From the Test menu, tap Functions, and the RTD tab.
To Next Page
Loading...
