Physical Interfaces and LEDs
20 FTB-700G/800 Series
155M-2.5G (PORT #1)
155M-2.5G (PORT #1)
The 155M-2.5G PORT #1 can be used for optical Transport test
applications.
Supported rates:
OC-1/STM-0, OC-3/STM-1, OC-12/STM-4, OC-48/STM-16.
Plug the SFP transceiver into the 155M-2.5M PORT #1 slot.
Note: Do not replace a SFP while the test is running to avoid distorting statistics.
First stop the test case, replace the SFP and then restart the test.
WARNING
Use only EXFO supported transceivers. Refer to this product’s
technical specifications at www.exfo.com for the list of supported
transceivers. Using non-supported transceivers can affect the
performance and accuracy of the test.
To Next Page
Loading...
