Test Setup - Test Applications
NetBlazer 57
RFC 6349
RFC 6349
RFC 6349 is used to confirm that the Ethernet service is able to properly
carry TCP traffic.
The RFC 6349 test has to be executed in conjunction with a remote
compatible module in RFC 6349 Dual Test Set mode allowing bidirectional
testing. The Dual Test Set test provides independent results for each test
direction. The results from local-to-remote and remote-to-local are
available on the local testing unit.
Typical RFC 6349 test application:
Supported Interfaces/Rates: 10M to 10G LAN.
EVC
Testing Unit Remote Unit
FTB-700G/800 Series FTB-700G/800 Series
To Next Page
Loading...
