Test Results
424 FTB-700G/800 Series
Summary (RFC 2544)
Summary (RFC 2544)
From the Test menu, tap Results, and the Summary tab.
Start Time indicates the date and time the test has been started. The
date and time is reset every time the test is restarted or reset. For Dual
Test Set, this is the only information available on the remote module.
Power Recovery when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Power Recovery field. Refer
to Power Failure Recovery on page 559.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger and Alarms/Errors Logger on page 362.
Remote unit in use and locked for Dual Test Set indicates that this
module is used for Dual Test Set as the remote module.
Remote unit in Dual Test Set Mode indicates that this module is set as
remote but the DTS Connection is not established.
To Next Page
Loading...
