Test Results
446 FTB-700G/800 Series
Traffic - Ethernet
Traffic - Ethernet
From the Test menu, tap Results, Traffic, and when applicable the
Ethernet tab.
Note: For Through Mode test application, the traffic statistics are displayed for
both port directions (P1->P2 and P2->P1).
Traffic
Line Utilization (%) indicates the current percentage of the
transmitting/receiving line rate utilization.
Ethernet BW (Mbit/s) indicates the current transmitting/receiving data
rate expressed in Mbit/s.
Frame Rate (frame/s) indicates the current transmitted/received
number of frames (including bad frames, Broadcast frames and
Multicast frames) in frame per second.
Frame Count indicates the total number of transmitted/received valid
and invalid frames.
Frame Type
Displays the TX and RX count of the following frame types.
Multicast indicates the number of multicast frames
transmitted/received without FCS errors. Broadcast frames are not
counted as multicast frames.
Broadcast indicates the number of broadcast frames
transmitted/received without FCS errors.
To Next Page
Loading...
