Physical Interfaces and LEDs
NetBlazer 21
10G (PORT #1)
10G (PORT #1)
The 10G PORT #1 can be used for optical Transport test applications.
Supported rates:
OC-192/STM-64.
Plug the SFP+ transceiver into the 10G PORT #1 slot.
Note: Do not replace a SFP+ while the test is running to avoid distorting statistics.
First stop the test case, replace the SFP+ and then restart the test.
WARNING
Use only EXFO supported transceivers. Refer to this product’s
technical specifications at www.exfo.com for the list of supported
transceivers. Using non-supported transceivers can affect the
performance and accuracy of the test.
To Next Page
Loading...
